Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Delta Probing Wierdness

    Tuning and tweaking
    2
    2
    272
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • zzing
      zzing last edited by

      I have been following the delta calibration procedure and when trying to get a consistent trigger height, the G30 S-1 command is acting a little weird.

      Here is what it is doing while at (0,0): https://www.youtube.com/watch?v=KZfxW8t_FiE

      My config: https://gist.github.com/madebyjeffrey/2456bddcf6ef786d81ff64d11db44169

      My trigger heights each time were ~1.1, ~1.3, ~1.7. So it appears that something funky is going on.

      My setup is with a precision piezo PP20 setup in a custom effector.

      This is a mini kossel.

      Any help or guidance would be appreciated.

      1 Reply Last reply Reply Quote 0
      • dc42
        dc42 administrators last edited by

        Looks like you've updated from old firmware but you haven't deleted the deploy.g and retract.g files.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA