Toolselection in simplify3d
-
Hello,
i just updated my printer to the duet wifi. It is working now .But now i have a little problem with the toolselection. I am using simplify as slicer. If have setup two Tools. One is for my first extruder ans the other dir the second.
If i select in simplify the second extruder (tool1) the on starting the print the heater of extruder one (tool0) is starting to heat up.Can anybody help me to find the failure?
-
See if these help.
https://duet3d.dozuki.com/Wiki/Macros#Section_Tool_change
https://duet3d.dozuki.com/Wiki/Gcode#Section_T_Select_Tool
https://duet3d.dozuki.com/Wiki/Multiple_tools_and_Tool_change_macros
https://forum.duet3d.com/topic/6504/tool-changer-commands/20
