G30 S-1 not reporting back on my Delta
-
Hello,
I had to remove my Smart Effector so I could re assemble the E3D V6.
I went to check the trigger height , but when I send the G30 S-1 command I do not get a trigger height on the PanelDue or on the Web interface. The green light on the Smart Effector does flash when probing.
If I run the Auto Cal I do get a report back. .399 before and .046 after.
-
forgot to add this:
Firmware: Duet WiFi 1.02
WIFI Server: 1.21
Web Interface: 1.21.2-dc42
-
You mean G30 S-1?
-
Sorry, That's correct G30 S-1
-
This is strange. I turn on my printer last night and now G30 S-1 does report back a trigger height number.
