M915 E returns same as empty
TypQxQ last edited by
I'm running on duet wifi 1.03 and 2.02RC2(RTOS) (2018-09-07b2).
Typing 'M915 E' returns truncated response, same as 'M915'. Is that normal?
M915 doesn't currently recognise the E parameter, because when it was first implemented, stall detection was not supported on extruder drives. I'll fix that.
brunofporto last edited by
You may use the P parameter instead
M915: Configure motor stall detection
Pnnn:nnn:... Drive number(s) to configure