Is computer needed after upload code?



  • I could not fine an answer in my searches. After uploading a gcode file and start the print, do I still need the computer connect and running. Duet WiFi, firmware version 2.0.
    Thanks,
    Bill



  • Nope. Only if you want to access the DWC to do something. The gcode file is printing from the SD card in the Duet.



  • Correct, not needed.

    In face, occasionally, the printer will drop off the network for some reason or another. (Router reboot, whatever). It just keeps printing...


 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.