Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    5V PWM Output Duet 0.6

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    4
    454
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • MaxSchwieningundefined
      MaxSchwiening
      last edited by

      I was wondering where is there a 5V PWM output on my duet 0.6? And what gcode do I need to control it?

      Thanks

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        There are no 5V PWM outputs on the Duet 06, just 3.3V ones on the expansion connector and open drain ones on the heater and fan connectors.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        MaxSchwieningundefined 1 Reply Last reply Reply Quote 0
        • MaxSchwieningundefined
          MaxSchwiening @dc42
          last edited by

          @dc42 Thanks. Do you know the best way get a signal to a 5V TTL input on a laser driver?

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators
            last edited by

            I would use one of the 4 gates in a 74HCT02 IC to level shift the signal. There is a thread about doing the same thing to control a laser from a Duet WiFi.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA