Liquid Cooling monitor

  • Hello all,
    Is there a way to monitor a 10K thermistor(Like this one over on amazon that is connected to the heatsink of a liquid cooling system and pause the machine if it reads above a certain temperature?

  • administrators

    You can monitor it in Duet Web Control by connecting it to a spare thermistor input and using M305 to create a named virtual heater for it. Also configure the thermistor parameters in the M305 command.

    To have the print stop when the temperature gets too high, use M143 to configure a heater protection item for that virtual heater.

Log in to reply