Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Ender 3 Duet WiFi and Maestro drill guides

    Scheduled Pinned Locked Moved
    Example setups and prints
    2
    2
    1.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Agniusmundefined
      Agniusm
      last edited by Agniusm

      I have modified my Ender 3 printer for duet boards. I have included drill and cut guides for wifi and maestro to be fitted into original enclosure. You will need drill, 2mm drill bit, hacksaw or jigsaw for metal, a file to smooth out roughness.
      https://www.thingiverse.com/thing:3260958
      For LCD you will need additional 10 way cable and cut out slots on LCD's EXP1 and EXP2 connectors to fit cables reversed.
      For duet its a tight fit. Wi-Fi needs bed connector to be bewildered and soldered in reversed.

      1 Reply Last reply Reply Quote 2
      • 3dmntbighkerundefined
        3dmntbighker
        last edited by

        I did the board this way.

        https://www.thingiverse.com/thing:3197999

        Nice work

        Scratch built CoreXY with Maestro
        Heavily modified Ender 3 with Maestro
        MPCNC work in progress with Duet WiFi

        1 Reply Last reply Reply Quote 1
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA