upgrade for axiom dual direct drive

[bwireman]

hi all I'm looking to do a major up grade on my axiom 3d printer. I'm looking for any help with what I need to know before I jump in feet first.
well I looking to replace the motherboard with the duet board , and switch both hot ends to a ED3 hot end , also add a probe. so what will be involved in this process? is there anything I'm going to need to know before hand? any help would be grateful.

[Phaedrux]

Take a look at this for a breakdown of what you'll need to know.

https://duet3d.dozuki.com/Wiki/Going_from_Marlin_on_Arduino_to_RepRapFirmware_on_Duet