M226 Pause Gcode ignored
-
You mean you have M25 in a macro, and you are invoking that macro from DWC or PanelDue? I've just tested that, and it works for me.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 Yes. To test it in isolation, I just now put M25 in its own macro to test it by itself. I invoked it by clicking it from the DWC Machine Control panel, the User-Defined Macro list and I still get:
M98 P"0:/macros/Pause"
Error: M25: Cannot pause print, because no file is being printed!
My board and firmware versions:
Firmware Name: RepRapFirmware for Duet 2 Maestro
Firmware Electronics: Duet Maestro 1.0
Firmware Version: 2.02RC6(RTOS) (2018-12-15b2)
Web Interface Version: 1.22.5 -
Were you definitely printing from the SD card on the Duet at the time?
