How do I up the temperature limit of 260C?

gzcwnk

6:48:01 AM M143 Temperature limit is 260.0C

I want to do filaments like Polycarb (300C?) and this seems to low. and eSun ABS+ (which specs 220C~260C) So I assume I want this set to maybe 280C or 320C?

Cant find this in the wiki.

bot

M143 S(temp)

http://reprap.org/wiki/G-code#M143:_Maximum_heater_temperature

gzcwnk

never mind I found it in the config.g

; Heaters
M143 S260 ; Set maximum heater temperature to 260C

doh…

iDevelo

Also make sure your hotend can handle those temps!