Smart effector not triggering on G30
-
Please confirm that this is the test you are doing:
- Position the effector well above the bed.
- Send G30. [Printer must previously have been homed.]
- Effector moves towards the bed
- Tap the nozzle upwards
- The green LED on the effector should flash, and the downward movement should stop at the same time.
-
Well, I deleted my config.g override, and changed to p8. It stopped travel.
Changed back to p5, seems to be working now.
Odd, nothing in the config override should have been doing anything, but it seems to be working now.
Thanks for all your help @dc42
