Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
I installed nimble and printed 2hrs detail. However nimble motor became very hot. Nimble support offered "to lower the amps going to the stepper" Stepper is here
How can i limit current to motor? (if it helps at all )
many thanks!
https://duet3d.dozuki.com/Wiki/Gcode#Section_M906_Set_motor_currents
thanks!
i also found other useful topic
)