Triple Z Motor Setup.
ozgiac last edited by
I am building a Large Printer with 3 Independent Z motors and axis.
Besides the Normal Bed Leveling on this which cam be done.
What i would firstly like to do is Physically get the bed as level as possible before running a bed mesh levelling.
Ie, be able to probe near each axis and move each motor to get the bed physically level as possible.
Then run normal mesh levelling.
Thanks in advance.
aidar last edited by
So what is your question? Is it possible? Yes, it is. Look at https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors and https://duet3d.dozuki.com/Wiki/Using_the_manual_bed_levelling_assistant