how to home z not in x=0 and y=0?
-
Hi everybody,
Hi everybody,
I'm pretty sure this is an already discussed topic, but I couldn't find it. My z- probe is placed 25mm X off-center of the nozzle. The x end stop is placed in order to have nozzle just on the border of the bed. So, when I try to home Z, the probe is out of the bed.
How to make the z homing happen in a x>25 position?
thanks!
-
@alessandro-g, see https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter#Section_Homing_Z_using_a_Z_probe.
-
Thankyou!