Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    sequential printing, Sli3r

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    sequential printing sli3r
    2
    3
    387
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • PuGundefined
      PuG
      last edited by

      Good morning,

      I've been having problems since moving over to the Duet2 Wifi board, basically it doesn't honor sequential printing defined in the gcode files generated by Sli3r. Just wondering if anyone else has had this issue or a potential fix? These had previously worked fine on Occtoprint/Ramps 1.4 .

      Cheers, James

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        Like any other firmware, RepRapFirmware will execute GCode moves in whatever order the slicing program generates them. So the problem is with how you have configured the slicer, not with the Duet.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • PuGundefined
          PuG
          last edited by

          Sorry I wasn't inferring its specifically caused by Duet2 but there is a reason behind it not working - turns out pointed me in the right direction, Print Settings/Output Options Complete individual objects had become unchecked.

          Cheers

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA