Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    M997: File DuetWiFiServer.bin not found

    Scheduled Pinned Locked Moved
    Firmware installation
    4
    21
    2.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • totalitarianundefined
      totalitarian
      last edited by

      Just tried two newly formatted cards and get the same problem.

      M21: Cannot initialise SD card 0: Card is unusable

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by dc42

        Looks like there may be a problem with the SD card socket then. When you run M122 with an SD card in the socket, does the report say that the SD card was detected, or not?

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • totalitarianundefined
          totalitarian
          last edited by

          SD card 0 detected, interface speed: 0.2MBytes/sec

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators
            last edited by

            So it's not the card detect switch that's the problem. It's probably one of the contacts in the socket, or the processor.

            Have you ever used a SD card extender with the microSD card socket?

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • totalitarianundefined
              totalitarian
              last edited by

              @dc42 said in M997: File DuetWiFiServer.bin not found:

              SD card extender

              Sorry no, should I?

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators
                last edited by dc42

                @totalitarian said in M997: File DuetWiFiServer.bin not found:

                @dc42 said in M997: File DuetWiFiServer.bin not found:

                SD card extender

                Sorry no, should I?

                Definitely not! SD card extenders can damage the socket.

                If your Duet is under warranty, please ask your supplier to repair or replace it.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                1 Reply Last reply Reply Quote 0
                • totalitarianundefined
                  totalitarian
                  last edited by

                  It is 2 years old so I guess not. Time to buy a replacement I guess. Thanks for helping anyway 🙂

                  dc42undefined 1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators @totalitarian
                    last edited by

                    @totalitarian said in M997: File DuetWiFiServer.bin not found:

                    It is 2 years old so I guess not. Time to buy a replacement I guess. Thanks for helping anyway 🙂

                    It's probably possible to repair it. The soldering on the SD card socket pins and the resistor behind it would need to be checked, if nothing is found then the SD card socket replaced, and if that doesn't work then the processor replaced. Which country are you in?

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • totalitarianundefined
                      totalitarian
                      last edited by

                      UK, I bought directly from duet.

                      1 Reply Last reply Reply Quote 0
                      • dc42undefined
                        dc42 administrators
                        last edited by

                        If you want to send it to me I can take a look, although it may take a little while due to my workload. So you should probably still buy a replacement.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        1 Reply Last reply Reply Quote 0
                        • totalitarianundefined
                          totalitarian
                          last edited by

                          New duet fitted and printer now back on online.

                          This is the state of the faulty duet. Sure you still want to take a look at repairing it? Looks pretty charred to me...

                          0_1551904255622_32030778-13e3-47ab-ad4d-81938f545dbd-image.png

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator
                            last edited by

                            😲 Gruesome.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            1 Reply Last reply Reply Quote 1
                            • dc42undefined
                              dc42 administrators
                              last edited by dc42

                              That does look bad. From the distribution of the soot, it looks to me that something may have caught fire above the Duet, not on it. But you would need to clear away the soot and check for burned traces under it to be sure.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              1 Reply Last reply Reply Quote 0
                              • totalitarianundefined
                                totalitarian
                                last edited by

                                The board is mounted upside down, nothing below the board except my desk. Strange one indeed.

                                0_1551911674348_b9569cdd-e8a4-49c9-9df0-fd232a42fead-image.png

                                0_1551911681422_323deee3-168c-4bd5-bdce-c449a266ccb9-image.png

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post
                                Unless otherwise noted, all forum content is licensed under CC-BY-SA