How do I set the tool offset.
-
When I home the printer it takes me to the regular x,y.z limit switches but the tool is not on the 0,0 corner of the bed. When I place the nozzle to what I think the tool should stop at the x reads 10 and the y reads 30. Bed level remains the or z remains the same. I just upgraded the Creality CR-X to the Duet 2 Wifi with the E3D Cyclops 2in 1out. I know the tool is not in the same position as the former was. Can someone please assist me with this.
-
-
Thank you