@OwenD @dc42 I am still getting the SPI issue on the new firmware and I seem to be able to recreate the issue by going into the Unifi web UI and going to the duet and clicking reconnect that seems to put it into that error state

@OwenD ok cheers will give it a try

@OwenD I can't see beta 4 only beta 3.

@OwenD @dc42 reverting back to 1.27 has made the SPI issue disappear for me.

@OwenD I couldn't get the info due to time restraints at work but I have rolled it back.

@OwenD could make sense, This is at my work and we use Unifi wifi gear. How about yourself?

@OwenD I will try just never don't this before, is there a way to log this via the duet webinterface and not need to connect a laptop directly?

@OwenD I'm not in the office but a colleague sent me thisreceived_6062637163802703.mp4

As you can see its being spammed

@OwenD I can't replicate it but when it happens again then I can try and get it.

Hi, I have also been getting instability issue with the wifi since going to 3.5.0b1.

The duet will drop off from the network midprint or even not connect at all unless i power it down and then back up.