Hi all..
We are planning to build a printer with Independent Dual extruders, here I am not sure about few things. I want to confirm it before starting the work.
Using the components:

• Power Supply 48V
• Duet 3 6HC board
• For X, U axis Using LDO NEMA 17 Stepper 42STH48 2504AC 48MM (https://shop.panther3d.in/product/ldo-nema-17-stepper-motor-ldo-42sth48-2504ac/)
• For Z axis Using Dual Z Dependent NEMA 17
• For Y axis NEMA 23 Lead shine 4 wire
  current/phase -3A
  resistance/phase - 0.8 ohms
  Inductance/phase - 2.8mH
• planning to use Orbiter Extruder for Extruder0 (E0) & Extruder1(E1) which uses LDO-36STH20-1004AHG motor(https://www.trianglelab.net/products/orbiter-extruder-v20?VariantsId=10239)

I've tried searching whether we can operate the orbiter extruder motor on 48V DC.
Here my question is
1.Can Duet 3 6HC drive NEMA 23 motors on 48V PS?
2.Can we operate Orbiter Extruder motor E0 & E1 on 48V PS?

Could you guys help with this

Thanks in advance.
prathik.s

Hello there!
we are using Duet3d 6XD MB connected to SBC RPi, we've uploaded the config files and all the files from the DWC. Unable to find those files in the RPi SD card. While uploading macro files couldn't upload entire folder at a time, had to upload individual files at a time. So tried to copy the folder directly in to the SD card.
requesting for support

thank you
PRATHIK__