Hi, random reboot the machine.
m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.5 (2022-11-30 19:36:12) running on Duet WiFi 1.02 or later + DueX5
Board ID: 0JD0M-9K662-MGPSN-6J9DL-3SN6K-1SY6W
Used output buffers: 1 of 26 (15 max)
=== RTOS ===
Static ram: 23836
Dynamic ram: 81896 of which 0 recycled
Never used RAM 3492, free system stack 184 words
Tasks: NETWORK(ready,12.1%,237) HEAT(notifyWait,0.1%,317) Move(notifyWait,0.0%,363) DUEX(notifyWait,0.0%,24) MAIN(running,83.9%,438) IDLE(ready,4.0%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:19 ago, cause: software
Last software reset at 2023-07-27 16:09, reason: OutOfMemory, none spinning, available RAM 4, slot 2
Software reset code 0x41d2 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x20003e98 Task Move Freestk 348 ok
Stack: 20019fb4 0041009d 200038c8 00410273 00000008 00000054 20003eec 00428e8b 2001aa00 2001e7a8 200082f3 0042786f 2000cb18 0041aff1 391aa800 200082f4 0000000b 0000000b 20003eec fffffffc 0042a045 33053224 3d9e076c 00000000 4471220d 00000000 301c5fff
Error status: 0x00
Step timer max interval 0
MCU temperature: min 32.0, current 32.7, max 33.0
Supply voltage: min 24.0, current 24.0, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/3, heap memory allocated/used/recyclable 2048/30/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min n/a
Driver 1: standstill, SG min n/a
Driver 2: standstill, SG min n/a
Driver 3: standstill, SG min n/a
Driver 4: standstill, SG min n/a
Driver 5: standstill, SG min n/a
Driver 6: standstill, SG min n/a
Driver 7: standstill, SG min n/a
Driver 8: standstill, SG min n/a
Driver 9: standstill, SG min n/a
Driver 10:
Driver 11:
Date/time: 2023-07-27 16:09:22
Cache data hit count 722776272
Slowest loop: 7.75ms; fastest: 0.19ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.5ms, write time 3.6ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 2 -1 -1 -1, chamber heaters 3 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== DueX ===
Read count 1, 3.10 reads/min
=== Network ===
Slowest loop: 19.51ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 1 of 8
= WiFi =
Network state is active
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.27
WiFi MAC address f4:cf:a2:69:47:9a
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 26120
WiFi IP address 192.168.1.205
WiFi signal strength -64dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
it happens in duplicate mode.