@infiniteloop
Our old Modix duet 2 controller had a short and burned its drivers, so we have ordered a new controller Duet V3 6hc as I mentioned before. I'm attaching link to the drive to the whole firmware folder with all the files including home and config.g . Firmware zip folder its named new compiled firmware.zip. I also included videos of whats happening exactly. I would appreciate if you guys would be able to check what am I doing wrong.
Link to the drive - https://drive.google.com/file/d/1rWz-rtWuztu5LfidsEUuygnTc86CAnKw/view?usp=sharing

Hello, so I have installed and compiled firmware for my modix printer on Duet V3 6hc, but cant get it running propertly. Main problem is that while homing x axis y axis moves to, same happens if I try to home y. Checked the firmware with few engineers everything seems to be right. Any Ideas what could be causing this anomaly that both y and x steppers get signal from the same command?