@jay_s_uk Thakyou so much for the response. I tried that and it would not work. I then tried to use my terminal command line to make it work and it worked. I added the network and connected to web control. Thankyou to everyone for reading and jay for giving me the idea of which software I was using. For anybody in the future don't use serial tools just do the command line. May not look as pretty but it works really well. Cheers guys and happy coding

@jay_s_uk Thakyou so much for the response. I tried that and it would not work. I then tried to use my terminal command line to make it work and it worked. I added the network and connected to web control. Thankyou to everyone for reading and jay for giving me the idea of which software I was using. For anybody in the future don't use serial tools just do the command line. May not look as pretty but it works really well. Cheers guys and happy coding

@jay_s_uk thank you for the reply. I am on my Mac and using serial tools.

Hiya all. I recently bought a duet 2 wifi but I can't get the wifi module to work. Prior to installing I plugged the motherboard into my Mac and use serial tools to access it. I ran the M552 S-1 command to stop halt the wifi module then used M552 S0 to restart. After this I used the M587 command with the proper password format and SSID format. After checking if it was added to M587 it replied with 'No Networks Found'. I was running RRP 2.03 and updated to 3. but made no difference. I attached images below. Someone please help e with this I can't find out what I am doing wrong.

MY M122 command output:
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.0 running on Duet WiFi 1.02 or later
Board ID: 08DJM-9178L-L4MSN-6J9DJ-3S86K-KB02N
Used output buffers: 1 of 24 (2 max)
=== RTOS ===
Static ram: 30516
Dynamic ram: 91228 of which 548 recycled
Exception stack ram used: 256
Never used ram: 8524
Tasks: NETWORK(ready,1256) HEAT(suspended,1476) MAIN(running,3764) IDLE(ready,156)
Owned mutexes:
=== Platform ===
Last reset 00:02:24 ago, cause: power up
Last software reset time unknown, reason: Watchdog timeout, spinning module Platform, available RAM 10672 bytes (slot 1)
Software reset code 0x00a0 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0043380f BFAR 0xe000ed38 SP 0x20004954 Task 0x4e49414d
Stack: 0044ccc7 0044a256 6100f000 00000000 00000000 00000000 00000000 3331bb4c 40000000 3f317200 b5ddea0e 388ab296 bb360a72 3a5b842b 00000000 00000000 3f800000 00000000 00000000 80000010 20003244 20009194 0044ccc7
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 17.4, current 22.7, max 23.1
Supply voltage: min 0.7, current 1.6, max 1.7, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 204974788
Slowest loop: 6.89ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0(0), FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Stack

Running command to add network:
M552 S-1
Error: Bad command: MM552 S-1
ok
M552 S-1
WiFi module stopped
ok
M552 S0
ok
WiFi module started
M552
WiFi module is idle
ok
M587 S”XY1789" P”Jake78"
M587
No remembered networks
ok