@oliof Ah thats a simple fix, opened a ingonito window and could see the correct version, thanks

@oliof Ah thats a simple fix, opened a ingonito window and could see the correct version, thanks

When i updated my firmware and duet web control from 3.5.0-rc.4 to 3.5.2 it seems to work fine. However after a restart the duetwebcontrol version is reported as the old version from the interface (3.5.0-rc.4). However if i check the apt package version duetwebcontrol is still installed as 3.5.2.

So its only reported as the old version in the web interface, causing a warning due to incompatible SW versions.

From the interface:
Product Short Name Version
Duet 3 MB6HC MB6HC 3.5.2
Duet 3 Expansion EXP3HC EXP3HC 3.5.2
Duet Software Framework DSF 3.5.2
Duet Web Control DWC 3.5.0-rc.4

From APT:
duetcontrolserver/unstable,now 3.5.2 arm64 [installed,automatic]
duetpluginservice/unstable,now 3.5.2 arm64 [installed,automatic]
duetruntime/unstable,now 3.5.2 arm64 [installed,automatic]
duetsd/unstable,now 1.1.0 all [installed,automatic]
duetsoftwareframework/unstable,now 3.5.2 arm64 [installed]
duettools/unstable,now 3.5.2 arm64 [installed,automatic]
duetwebcontrol/unstable,now 3.5.2 all [installed,automatic]
duetwebserver/unstable,now 3.5.2 arm64 [installed,automatic]

@dc42 Ok great, thanks for the reply. Then i guess i can report back ones i have tested.

I have a 6HC and a EXP3HC, but if i under stand you i should be able to share the MISO, SCK, and MOSI pins to different sensors, and then have CS0 to one and CS1 to another etc? How is it with the 3.3 supply, how much current can that handle?

Do you know the maximum lenght? Im planning on running shielded wires so hopefully it should be fine.

Hello

Im planning on addind som temperature and humidity sensors for monitoring build chamber and spool chambers. I saw in the documentation that BME280 should be supported, but im wondering if its possible to add them on the same SPI bus or if i should wire them separately?

This is the sensor im planning on using

https://www.amazon.se/barometriska-temperatur-luftfuktighet-temperaturfuktighetssensor-fukttemperatursensormodul/dp/B0C4L8BKJP/ref=asc_df_B0C4L8BKJP/?tag=shpngadsglede-21&linkCode=df0&hvadid=476443254436&hvpos=&hvnetw=g&hvrand=6489179680714811170&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1012511&hvtargid=pla-2200276659493&psc=1&mcid=8c4311efe9033d3494654b062d364c9f

I havent found any info if its possible to wire them on the same bus, and if its not, is there any limit on how many i can connect seperately?