@oliof Thanks. That's all for now

John

@oliof Thanks. That's all for now

John

Thanks @oliof for clear answer. I guess the display+rotary will be the way to go.

John

Thanks @oliof for your clear and good answer. I appreciate.

This Duet approach starts to gain my interest more now.
Can I use the Duet for CNC machine control too (like in instead on Mach3 for example).
Most importantly, does CAM software (like Fusio360 for example) support Duet g-code?

BR

John

@oliof, Thannks for you answer for my question about selecting the Duet module. Very good and professional answer. I guess got the concept of Duet now.

Unfortunately I was not able to continue the same thread. Also, I was not able to mark your answer as "solution" I would like to do so. Therefore, I just started a new topic. Now good idea but Can't find my way to continue the original topic.

I understood that Duet consist of a web server, allowing me to use a web browser (or even a mobile phone) as user interface?
That's good. I would like to ask if there is separate user interface module available? Like a screen and rotary switch of similar?

BR

john

Dear support,
quite simple question, I hope.

I happened to got the small MiniFactory 3D printer in my hands. The hardware is extremely sturdy and I'd like to utilize it.
Can you please recommend the Duet control board for the following:

• X, Y and Z axis with NEMA 17 stepper. All axis driven by means of a lead screw (Cartesian, not coreXY).
• Two filament extrudes with NEMA 13 stepper (I might remove one extrude, leaving just one)
• Micro switch homing for all axis
• Hot plate (about 165x165 mm)
• 2 hot ends (might remove one)
• USB and/or microSD reader

The best if the control board include the stepper drivers too. No need for WiFi, the printer will be off-line anyway.

Thanks in Advance

John