I have had a similar issue, however when I try to ping the IP address the terminal is listing I get a timeout. I've checked the info on my router and it has assigned this same IP address to the duet so I have no idea why it is not locating it. I am on a mac and have tried the above recommendations, also to no avail. Any ideas on what else I could try to diagnose the problem further? Apologies if this is in fact a different issue or something obvious I have missed.
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.1.1 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2020-05-19b2
USB is ready with "M122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1179.23ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 0 of 8
- WiFi -
Network state is active
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address f4:cf:a2:5b:0e:d9
WiFi Vcc 3.38, reset reason Unknown
WiFi flash size 4194304, free heap 25944
WiFi IP address 192.168.0.32
WiFi signal strength -66dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
ok