Hi everyone

Excuse me for my late response.
I didn't change anything at all like the firmware
It's trying to connect.
where I should have the indications of ambient temperature it shows 0 °C ( nozzle and bed ). And I noticed that the nozzle is getting hot.
It makes the usual "bips" when I touch the screen, it is not mounted on a case yet.
I don't know which versions of the firmwars I have on both screen and card.
It is a 4 pin cable.

Thanks again for your support.

Hi guys

I'm having a trouble with the screen of my machine it is a PanelDue 7I. When I turn on my machine and when I want to home axes or set the temperature, it doesn't work. It seems that it is not responding.
Do you have an explanation of this problem.

In advance thank you for your response and your time

Raphaël