Have you read https://somei3deas.wordpress.com/2017/01/11/using-the-diamond-hotend-with-duetwifi/ ? It's not a delta, but most of it is about how to use the Diamond with RRF.
Yes I read this. This document is actually was the base of my build.
Thanks
Hi Fcwilt
Thanks for the quick response.
My machine is set and mounted but problem is how to setup tools I want to setup 10 different colors with 3 extruders. put the tools in the config.g but failed to successfully print because the slic3r does not recognize those tools and I don't want to post process the g code.
Him
Hi All
Anybody developing delta with diamond hotend using Duetwifi?