Topics created by hardgeek95

@hardgeek95 said in Converting davinci JR 1.0 board to reprap:

Hello, I need help to make compatible reprap firmware with stock davinci JR 1.0 board, the board have Atmel ATSAM4E8E also have other microcontroller that control Nfc tag, some filament sensor and ntc and hot end too but I plain cut off that MCU and jumper ntc and hot end direct to main CPU, I already have all pins mapped but I don't have experience with making changes on reprap firmware to make Pinout compatible.

Almost all of the pin configuration data is in file Pins_DuetNG.h. So that's the main file you will need to change.