I haven't ruled out this is user error but I can't figure where I'm going wrong.
Hardware is known good.
DSF works when using the stable branch.
I upgrade to unstable and update the pi side, everything works fine until it tries to update the board. It thinks the firmware flash works, but the board never comes back up.
I use bossa to manually flash to 3.5.0rc3. Bossa thinks it flashes successfully but no joy on the DSF side.
I nuke the card and reimage it, and bossa reflash the board to 3.4.6. Run the linux updates (still on the stable branch). Everything's happy, DSF connects no problem.
I switch back to unstable and run the linux updates again. Double check that it's pulling 3.5.0rc3 and it is. Update tries to flash the board and it fails with errors when running apt dist-upgrade.
I use Bossa to reflash 3.5.0rc3. Bossa thinks it works but again, no DSF joy.
I've reviewed the release notes and everything else I can find and I can't figure out what I'm missing. Help?
EDIT - and yes I am BOSSA flashing the SBC builds not the standard firmware.