Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. kolbaskin
    • Profile
    • Following 0
    • Followers 0
    • Topics 1
    • Posts 2
    • Best 1
    • Controversial 0
    • Groups 0

    kolbaskin

    @kolbaskin

    1
    Reputation
    1
    Profile views
    2
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    kolbaskin Unfollow Follow

    Best posts made by kolbaskin

    • RE: FLY RRF E3 Sapphire Pro H0 not found Error

      @jay_s_uk
      Thank you
      An issue has been solved

      posted in RepRapFirmware on other controllers
      kolbaskinundefined
      kolbaskin

    Latest posts made by kolbaskin

    • RE: FLY RRF E3 Sapphire Pro H0 not found Error

      @jay_s_uk
      Thank you
      An issue has been solved

      posted in RepRapFirmware on other controllers
      kolbaskinundefined
      kolbaskin
    • FLY RRF E3 Sapphire Pro H0 not found Error

      Hi everyone

      I have an issue with my Sapphire Pro with Fly E3 RRF Board and RepRap firmware installed.

      H0 heater (bedheat) does not show up in a dashboard. When I try to heat it through console, an error "H0 not found" is showing up

      Here is my configuration file:
      ; Configuration file for Duet WiFi (firmware version 3)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool v3.1.10 on Sat Dec 05 2020 19:46:54 GMT+0100 (Central European Standard Time)

      ; General preferences
      G90 ; send absolute coordinates...
      M83 ; ...but relative extruder moves
      M550 P"Kolbaskin" ; set printer name
      M669 K1 ; select CoreXY mode

      M929 S1

      ; Network
      M552 S1 ; enable network
      M586 P0 S1 ; enable HTTP
      M586 P1 S1 ; enable FTP
      M586 P2 S1 ; disable Telnet
      M575 P1 B57600 S1 ; Turn on PanelDue/RepPanel

      ; Drives
      M569 P0 S0 ; physical drive 0 goes forwards
      M569 P1 S0 ; physical drive 1 goes forwards
      M569 P2 S0 ; physical drive 2 goes forwards
      M569 P3 S0 ; physical drive 3 goes forwards
      M584 X0 Y1 Z2 E3 ; set drive mapping
      ;M350 X32 Y32 Z32 E16 I1 ; configure microstepping with interpolation
      M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
      M92 X80.30 Y80.30 Z1600.00 E392.40 ; set steps per mm
      M566 X400.00 Y400.00 Z60.00 E100.00 P1 ; set maximum instantaneous speed changes (mm/min)
      M203 X18000.00 Y18000.00 Z1200.00 E30000.00 ; set maximum speeds (mm/min)
      M201 X2500.00 Y2500.00 Z200.00 E1000.00 ; set accelerations (mm/s^2)
      M204 P2000 T4000 ; set acceleration for printing moves
      M906 X1200 Y1200 Z1200 E1200 I50 ; set motor currents (mA) and motor idle factor in per cent
      M84 S30 ; Set idle timeout

      ; Axis Limits
      M208 X0 Y0 Z0 S1 ; set axis minima
      M208 X223 Y220 Z235 S0 ; set axis maxima

      ; Endstops
      M574 X1 S1 P"!xstop"
      M574 Y2 S1 P"!ystop"
      M574 Z1 S1 P"!zstop" ; configure active-high endstop for low end on Z via pin zstop

      ; Z-Probe
      M558 P1 C"zprobe.in" H5 F120 T6000 ; set Z probe type to unmodulated and the dive height + speeds
      G31 P500 X0 Y0 Z2.5 ; set Z probe trigger value, offset and trigger height
      M557 X15:215 Y15:195 S20 ; define mesh grid

      ; Heaters
      M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as PT1000 on pin bedtemp
      M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
      M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
      M140 H0 ; map heated bed to heater 0
      M143 H0 S120 ; set temperature limit for heater 0 to 120C
      M308 S1 P"e0temp" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin e0temp
      M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
      M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
      M143 H1 S280 ; set temperature limit for heater 1 to 280C

      ; Fans
      M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
      M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
      M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
      M106 P1 S1 H-1 ; set fan 1 value. Thermostatic control is turned off

      ; Tools
      M563 P0 D0 H1 F0 ; define tool 0
      G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
      G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

      ; Custom settings are not defined

      ; Miscellaneous
      M501 ; load saved parameters from non-volatile memory

      ;M593 F51 ; cancel ringing at 51Hz
      ;M572 D0 S0.7

      Please help!

      posted in RepRapFirmware on other controllers
      kolbaskinundefined
      kolbaskin