Phaedrux, Thank you for the help that seems to have resolved the issue.

Thank you i'll give that a try and report back.

no I did not cleanup any of it. it's the older Prusa Slicer 1.41.1

Prusa Slicer.

slot cover.txt m115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.1.1 ELECTRONICS: Duet WiFi 1.02 or later + DueX5 FIRMWARE_DATE: 2020-05-19b2

Here is the Start code. Full file attached
M107
M404 D0.4
M140 S70
M104 S170
M190 S70
G28
M190 S70
M104 S250
G92 E0
G1 X130 Y280 Z0.3 F2000
M109 S250
G1 X40 E20 F1000
G1 Y170 F2000
G92 E0
M572 D0 S0.7
G21
G90
M83
G1 Z0.2 F7800
G1 E-2 F3600
G1 X22.326 Y110.903 F7800
G1 E2 F2400
[0_1592744431586_slot cover.gco](Uploading 100%)

After upgrading to RRF 3 the job status / Layer chart no longer update.

After the upgrade my SD card had issues and needed to be formatted. I rebuilt the SD card and everything seems to work correctly except the Layer status does not update. Current layer time shows the count down but last layer time is always N/A and the chart is blank.
I have tried reinstalling the newest version of DWC. What could cause this issue? maybe a missing file?

DWC - 3.1.1
RRF - 3.1.1
Wifi Swerver - 1.23