Thanks everyone. I'll bite the bullet and upgrade now then.
Posts made by sprocket
-
RE: Laser PWM with Release 2.05.1 (Duet 2) - missing lineposted in Laser Cutters
-
RE: Laser PWM with Release 2.05.1 (Duet 2) - missing lineposted in Laser Cutters
@bearer That's correct. The only thing that stands out to me is that its the last move in a section followed by M5 (laser off)
-
RE: Laser PWM with Release 2.05.1 (Duet 2) - missing lineposted in Laser Cutters
Hi @FelixH,
Yes, this is repeatable. The gcode file has 10 repeats and the laser is off at this traverse every time.
-
Laser PWM with Release 2.05.1 (Duet 2) - missing lineposted in Laser Cutters
I've got a Duet 2 driving an Ender 3 with a laser module attached. I'm using the PWM circuit from the Duet Wiki. Its working well but it occasionally does a cut move with the laser turned off.
In the attached gcode file, the laser is off for line 1937:
PCB Jig 100x70.gcode1936> G1 S255 X57.50 Y146.00
1937> G1 S255 X88.70 Y146.00
1938> M5There are many similar lines in the gcode file so why does the laser turn off for just this one?
