@bearer Thank you for reply.
I did reset after flashing of course (is it enough to press reset micro-button next to usb slot for that?)
I'll try that commit then. Can't see any breaking changes between it and HEAD though but anyway.
@bearer Thank you for reply.
I did reset after flashing of course (is it enough to press reset micro-button next to usb slot for that?)
I'll try that commit then. Can't see any breaking changes between it and HEAD though but anyway.
I'm trying to install recent build of RRF from v3.02 branch to my Duet 2 Wifi 1.04 running stable RRF 3.1.1, 'cause I want to connect 12864 display and as far as I can see @dc42 has finally added its support in that branch.
The building process was completed without an issue, build configurations was selected according to `Build instructions' document.
After that I tried to upload new firmware bin file (from Duet2_RTOS directory) with DWC2 and the board hadn't boot anymore neither was accessible by USB (DIAG led is on). I was able to burn stable 3.1.1 firmware back via SAM-BA after erasing.
I tried to burn 3.02-dev firmware with SAM-BA too, but got the same result. Nothing is working, DIAG led is on.
Is any commit after abb62a3 from 3.02-dev considered to be working on Duet 2 Wifi? Or I'm doing smth wrong?
Thank you.