New board, can't connect (failed to retrieve network list)

[Dkos]

Hello!

I am just configuring my brand new Duet2 wifi board but i am facing a problem setting up the wifi connection to my home network.

I have it setup for an automatic DHCP (default) I have the wifi module started (reporting "Wifi module is idle"). After looking a bit on the forum i tried the following:

Updating firmware to (and DuetWifiServer as well):

FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2

Tried to connect manually with M587 S"" P"":

M587: Failed to add SSID to remembered list
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version
 

M587 returns:

M587: Failed to retrieve network list

Am i doing something wrong?

Thanks in advance!

[Phaedrux]

Do you know what version of Wifi server you're running? Perhaps it's mismatched to the main firmware. For 2.03 it should be 1.23.

[Dkos]

Seems to be fixed. Not sure which specific step i did made it work, after a bunch of restarts i re-create the config from the configurator tool, then i edited the SetNetwork macro, commented the M552 S1 from the config and run the macro instead..

Time to explore the rest!

[Dkos]

@phaedrux Thanks for the quick reply! i used the Wifi server from the same release as the firmware so i guess it was ok. After a few tries it seems to work now