Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    DuetWifi Mount + PanelDue enclosure (STL + sldprt files)

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    1.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Guyarosundefined
      Guyaros
      last edited by

      Hi all,
      I wanted to share with you my designs for DuetWifi mount and PanelDue enclosure.
      I included the original design sldprt files, and the STL files.
      The models can also be found at Thingiverse, in the following links:
      http://www.thingiverse.com/thing:1976962
      http://www.thingiverse.com/thing:1980251

      Fell free to comment if you like it, and to branch your design.

      DuetWifi Mount


      The DuetWifi mount is simple to print, with no support needed and pretty quick print, thanks to the perforated design.
      The mount raises the DuetWifi 20[mm] to optimize board cooling.
      I also included an optional 40[mm] fan mount, which can be connected easily using M3 bolts.
      I recommend to position the fan in such a way that will blow on top and below the stepper drivers.

      The DuetWifi board connected to mount with 4 M4 bolts. (any bolt length shorter then 25mm will be fine)

      STL files download
      http://www.guyaros.com/blog/images/3dprinting/DuetWifiMount/DuetWifiBaseVer2.STL
      http://www.guyaros.com/blog/images/3dprinting/DuetWifiMount/Fan40Mount.STL

      sldprt (2016) files download (ZIP file)
      http://www.guyaros.com/blog/images/3dprinting/DuetWifiMount/DuetWifiMountAssembly1.zip

      PanelDue Enclosure
      This enclosure designed for PanelDue 4.3".
      The enclosure can be mounted in various ways, thanks to the mounting adapters.
      All the key components in the PanelDue are accessible, including SD card, SD cable connector, PanelDue connector, reset and erase buttons.

      Required Hardware
      M3x6 (Mate LCD screen to Front panel), Quantity : 4
      M3x12 (Mate Front panel to Back plate), Quantity : 6
      M3x10 (Mate Back plate to Back Mount), Quantity : 5
      M4x20 (Mate Back mount to Link), Quantity : 1
      M5x40 (Mate Link to Rail), Quantity : 1
      M3 Nuts, Quantity : 5
      M4 Nuts, Quantity : 1
      M5 Nuts, Quantity : 1




      STL files
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3-Enclosure-Front-Ver2.STL
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3-Enclosure-Back-Ver2.STL
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3-Enclosure-BackMount-Ver2.STL
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3-Enclosure-MountLink-Ver2.STL
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3-Enclosure-MountRail-Ver2.STL

      sldprt (2016) files (ZIP)
      http://www.guyaros.com/blog/images/3dprinting/PanelDueEnclosure/PanelDue4.3EnclosureAssembly1.zip

      1 Reply Last reply Reply Quote 0
      • botundefined
        bot
        last edited by

        Well, I just found out here that there was a physical change for paneldue v2. Just checked, and realized I have one of each from my last two orders!

        It would be nice to be informed of major changes in hardware. Part of ordering multiple of the "same" part is having a reliable supply of compatible parts.

        BTW nice looking paneldue enclosure! hah.

        *not actually a robot

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA