My printer does not making auto bed leveling before printing

ABDELRHMAN SAMIR ABOGABAL · 29 Dec 2016, 11:37

my printer does not making auto bed leveling before printing
can any one help me to find solving in this problem
note i make in the configurator the points of the auto bed leveling

darookee · 29 Dec 2016, 13:37

You need to add G29 or G32 (depending on what you are using to set your points) to you starting gcode.

ABDELRHMAN SAMIR ABOGABAL · 29 Dec 2016, 14:16

did you mean starting g code (config.g )
or that is another folder

Qdeathstar · 29 Dec 2016, 21:48

No, you need to add it as a start-up command in whichever slicer you are using.