Kinematics Type Number Allocation for Colinear Tripteron
-
Hi @dc42,
as per https://github.com/dc42/RepRapFirmware/blob/dev/AddingNewKinematics.md I would like to request a Kinematic Type Number for Colinear Tripteron, a.k.a Delteron kinematics.There is a pre-existing implementation I will use as basis for my work.
-
@oliof there is a project on Reprap ongoing about Tripteron, in case you don't know it: https://reprap.org/forum/read.php?166,719575,page=1
Good luck implementing the kinematics for Duet. -
@JoergS5 I am aware, I am talking to Apsu on the 3d printing Discord (they started picking up the work again).
-
@oliof, I've reserved code 12 for you.
-
much obliged!