Finding the MAC address

heoconnor

M122 just comes back with: Emergency stop! Reset the controller to continue.ok

PaulHew

Your IT dept could tell you the MAC address if they wanted.
You could plug it into the network tell them the IP address and they can find the MAC that way.
Or ask them for an IP address, set it, they can scan and cross reference the IP to the MAC.

DocTrucker

MAC address is usually set in config.g.

DocTrucker

Run M540

https://duet3d.dozuki.com/Wiki/Gcode#Section_M540_Set_MAC_address

Edit: M540 on its own should return MAC address. Read the link to see how to set MAC address.

A Former User

@DocTrucker said in Finding the MAC address:

Run M540

aye, that works! didn't see it was specified ethernet, and not sure if it works for the wifi?

DocTrucker

@bearer Oh yeah, didn't think about the wifi half of the equation!

DocTrucker

"Note on the Duet 2 Wifi the MAC address is unique and set on the Wifi Module so this command has no effect. The default MAC address on a Duet 2 Ethernet is generated from the unique processor ID so there is normally no need to change it."

So trying to set it with M540 won't work. Whether or not it reports the correct address would have to be checked. Can you access your router and confirm from there?

A Former User

@DocTrucker said in Finding the MAC address:

@bearer Oh yeah, didn't think about the wifi half of the equation!

OP seems to be on Ethernet so thats okay, I was just curious about the wifi for future reference; ultimately a moot point as M122 doesn't seem include mac address for Ethernet (on the Maestro at least)

Phaedrux

@heoconnor said in Finding the MAC address:

M122 just comes back with: Emergency stop! Reset the controller to continue.ok

I think you might have sent M112

https://duet3d.dozuki.com/Wiki/Gcode#Section_M112_Emergency_Stop

Danal

Via a Windows machine command prompt:

C:\Users\Danal>ping 192.168.7.100

Pinging 192.168.7.100 with 32 bytes of data:
Reply from 192.168.7.100: bytes=32 time=3ms TTL=255
Reply from 192.168.7.100: bytes=32 time=36ms TTL=255
Reply from 192.168.7.100: bytes=32 time=168ms TTL=255
Reply from 192.168.7.100: bytes=32 time=64ms TTL=255

Ping statistics for 192.168.7.100:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3ms, Maximum = 168ms, Average = 67ms

C:\Users\Danal>arp -a 192.168.7.100

Interface: 192.168.7.210 --- 0x13
  Internet Address      Physical Address      Type
  192.168.7.100         2c-3a-e8-0b-2f-27     dynamic

DocTrucker

@Danal neat, copies directly to linux to:

doctrucker@BURPSPC:~$ arp -a 192.168.82.1
fritz.box (192.168.82.1) at e0:28:6d:bb:41:cc [ether] on enp8s0code_text

heoconnor

Got it using the M540 - Thanks everyone!!