G30 / G28 Bad Command

JohnnyCeee

@Veti

Yes, all work fine. Pin Down, Pin Up, Selfe Test ON and OFF.

also the Z Probe value (1000) is displayed in the test

Veti

what is the size in bytes of the deploy and retract script

JohnnyCeee

@Veti

here the whole content of the files

Deploy:

; deployprobe.g
; called to deploy a physical Z probe
;
; generated by RepRapFirmware Configuration Tool v2.0.4 on Thu Sep 26 2019 16:26:18 GMT+0200 (Mitteleuropäische Sommerzeit)
M280 P3 S10 I1

Retract:

; retractprobe.g
; called to retract a physical Z probe
;
; generated by RepRapFirmware Configuration Tool v2.0.4 on Thu Sep 26 2019 16:26:18 GMT+0200 (Mitteleuropäische Sommerzeit)
M280 P3 S90 I1

JohnnyCeee

@Veti said in G30 / G28 Bad Command:

what is the size in bytes of the deploy and retract script

200 Bytes Deploy
202 Bytes Retract

Veti

can you issue the commands M401 and M402?

JohnnyCeee

@Veti said in G30 / G28 Bad Command:

can you issue the commands M401 and M402?

Yes, Pin is moving out and in.

But:

16:49:18M402
Error: Bad command:
16:49:11M401
Error: Bad command:

Veti

there is something wrong with your deploy and retract scripts.

delete everything and type the commands per hand

JohnnyCeee

@Veti said in G30 / G28 Bad Command:

there is something wrong with your deploy and retract scripts.
delete everything and type the commands per hand

now this happend.

if i type M280 P3 S10 I1 it works. But M401 not

JohnnyCeee

@Veti

this is my library

fcwilt

Delete the probe files and create new ones with just the M280 command,

Perhaps there is something in the existing file that is causing the problem.

Frederick

JohnnyCeee

@fcwilt

Same problem

M401
Error: Bad command: M280 P3 S10 I1

Their is only the M280 command in the file.

JohnnyCeee

Okay. now it works fine.
I deleted all again and created again. Thank you very much!!