Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 wifi corexy homing z in middle of the bed issue

    Scheduled Pinned Locked Moved
    General Discussion
    3
    7
    306
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • weed2allundefined
      weed2all
      last edited by

      Hi...I just setup my custom corexy with a duet 2 wifi board and a precision piezo orion v2 in digital mode as a bed probe...for x and y I use optical endstop at 0,0 position,so far so good...I can home individual axis and all work ok...but I want to home z axis in middle of the bed and it seams that I cannot achieve this...I edited the homez.g and homeall.g for the nozzle to go to x150 y150 but only it's only go to x150 then home z axis...my working area is 300x300x315

      https://www.thingiverse.com/weed2all/designs

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti
        last edited by

        post your config and homing files.

        1 Reply Last reply Reply Quote 0
        • weed2allundefined
          weed2all
          last edited by

          config.g homez.g homeall.g

          https://www.thingiverse.com/weed2all/designs

          1 Reply Last reply Reply Quote 0
          • Vetiundefined
            Veti
            last edited by

            G1 H2 X150 Y150 F9000 ; go to first bed probe point and home Z

            H2 moves are not for Corexy. delete H2

            1 Reply Last reply Reply Quote 0
            • weed2allundefined
              weed2all
              last edited by

              That is a new configuration file made today on reprap configuration tool...why it put the h2 in homez.g and homeall.g?

              https://www.thingiverse.com/weed2all/designs

              Phaedruxundefined 1 Reply Last reply Reply Quote 0
              • weed2allundefined
                weed2all
                last edited by

                Ok...sweet...thank you so much.. I've deleted the h2 from homez.g and homeall.g
                All work as it should.. thank you...

                https://www.thingiverse.com/weed2all/designs

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator @weed2all
                  last edited by

                  @weed2all said in Duet 2 wifi corexy homing z in middle of the bed issue:

                  That is a new configuration file made today on reprap configuration tool...why it put the h2 in homez.g and homeall.g?

                  Known issue. Will be resolved in next update.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA