Trigger wifi reconnect during long print

clytle374

I thought this problem was gone after one of the recent updates, but it just returned about halfway through as 20 hour print.

What are the options to get the duet wifi to attempt to reconnect while printing.

Running Linux BTW

Thanks
Cory

dc42

Assuming you are running recent versions of RRF and DuetWiFiServer, the Duet continuously tries to reconnect if it loses the connection.

If for some reason it keeps failing to reconnect, then you could try resetting the wifi module (M552 S-1) followed by restarting it (M552 S1 assuming you run it in client mode). You could do this in a macro, commanded from a PanelDue or from a trigger.

clytle374

It was updated to latest version end of November or December. It's been much better recently.

Can this be done through USB?

Wifi light is off, not blinking, just off

dc42

@clytle374 said in Trigger wifi reconnect during long print:

Can this be done through USB?

Yes, you can send those 2 commands via USB.

droftarts

@clytle374 said in Trigger wifi reconnect during long print:

It was updated to latest version end of November or December. It's been much better recently

You may be on 2.04, or one of the 2.05RC releases. Best to update to 2.05 release: https://github.com/dc42/RepRapFirmware/releases/tag/2.05
@dc42 put in a lot of work to resolve the wifi disconnection issues. When you are next able to connect, please can you send M122 and post the response.

Ian

clytle374

I'm back online, here's the version info

RepRapFirmware for Duet 2 WiFi/Ethernet 2.05 (2019-12-13b1)
Duet WiFi Server Version: 1.23

Duet Web Control 2.0.4

Can I run M122 while printing?

droftarts

@clytle374 Yes, it should be okay to run M122 when printing!

Ian

clytle374

@droftarts

M122 output

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later
Board ID: 08DGM-917DA-G4MSJ-6JKDA-3SN6N-KSRB9
Used output buffers: 6 of 24 (16 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 92584 of which 416 recycled
Exception stack ram used: 512
Never used ram: 11848
Tasks: NETWORK(ready,628) HEAT(blocked,1232) MAIN(running,3800) IDLE(ready,160)
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 09:57:05 ago, cause: reset button or watchdog
Last software reset at 2019-12-30 07:03, reason: User, spinning module GCodes, available RAM 12088 bytes (slot 1)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 12
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 7.6ms, max retries 0
MCU temperature: min 42.3, current 42.6, max 42.9
Supply voltage: min 11.6, current 12.1, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/395
Driver 1: ok, SG min/max 0/415
Driver 2: ok, SG min/max 0/414
Driver 3: ok, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2020-01-08 12:35:31
Cache data hit count 4294967295
Slowest loop: 14.02ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 156, MinFreeDm: 108, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 724836, completed moves: 724801, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 0 is on, I-accum = 0.1
Heater 1 is on, I-accum = 0.6
=== GCodes ===
Segments left: 1
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is doing "G1 F3600.000" in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 200.31ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(1) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 1
WiFi firmware version 1.23
WiFi MAC address cc:50:e3:0d:22:c1
WiFi Vcc 3.35, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 22792
WiFi IP address 192.168.0.13
WiFi signal strength -51dBm, reconnections 0, sleep mode modem
Socket states: 0 0 2 0 0 0 0 0

clytle374

If I'm reading this properly I'm on the latest firmware.
Thanks
Cory

droftarts

@clytle374 said in Trigger wifi reconnect during long print:

Error status: 12

Referring to Error_codes_and_software_reset_codes this means:

0x04 Output buffer starvation
0x08 Output stack overflow

RRF 2.04 and 2.05 had changes to fix most instances of these. I've referred this thread to @dc42 to have a look at.

Ian

clytle374

@droftarts

My internet in the building with the printer is a special kind of horrible, the main DSL hasn't been much better. I've spent the last 2 days working on the system. Fixed DSL, I think. Ran ethernet to building and removing the cheap wifi booster out here.

I've changed the wifi name and password in the config.g file on the duet. But it's still connecting to the old wifi. How do I get it to change over?
NEVERMIND: That was way harder than it should be.
Thanks
Cory