Problem reaching machine setting in the latest release
-
Hi!
I've started installation of my duet2 bought some months ago.
i followed instructions and installed the latest firmware and web software. When i'm now about to install endstops and all the other cables i can't see the "machine settings" only UI settings in the webpage.
I had saved a tab in the browser with the old web page and was able to see "machine settings" and also click it.
I really need to see the endstops indications, any help?
I also tried to revert the firmware to the "2" generation but got an
error reporting that duetcombinedIAP file was missing so it is not
possible to revert. -
Does your left bar look like this?
If so, the machine settings are at the bottom.
If not, press the "hamburger menu", the three bars just left of the system name (duet3 in the example)
-
Hi1
Thanks for answering!In Settings i have only "User Interface"
About says "Duet Web Control" 2.0.0-RC3 is that right? -
@stend said in Problem reaching machine setting in the latest release:
Hi1
Thanks for answering!In Settings i have only "User Interface"
About says "Duet Web Control" 2.0.0-RC3 is that right?That's very old. Try the 2.0.7 SD version from https://github.com/chrishamm/DuetWebControl/releases/tag/2.0.7.
-
!! working
Thanks for the very prompt reply.
Now first a cup of tea and then endstops
regards
/Sten -
@stend said in Problem reaching machine setting in the latest release:
error reporting that duetcombinedIAP file was missing so it is not
If you do ever want to return to the previous 2.x firmware you can find that missing file along with the other firmware .bin files in the release.
