Hyperube HEVO with DUET3

[tobias_munich]

Hi together,
may i introduce...
Since nearly 6 months I am working on this machine and its still "work in progress"

Build: Hypercube HEVO, Dual Z, 300x300x400
Board: DUET3 + SBC Raspberry Pi4
Firmware: RRF3 Beta 3
Extruder: Zesty Nimble
Z-Sensor: Orion Piezo
X-Min, Y-Min: optical Endstops
DHT22: for chamber temperature

Webcam: RPI-Cam and RPICamControl -> https://elinux.org/RPi-Cam-Web-Interface

Power Control and Monitoring: Sonoff POWR2 with Tasmonta 8.0.1

LEDs: Control WS2812B RGB LEDs with an ESP8266 over WiFi! -> https://github.com/Aircoookie/WLED

Dashboard: Homeassistant

[droftarts]

@tobias_munich Nice! I've just started a HEVO build. Did you use the standard parts, community modified or design your own?

Ian

[tobias_munich]

@droftarts thanks.
no I'm not using the standard parts. I am using the reinforced versions.
all my parts are with normal nuts and all parts are more stable

the main parts - reinforced.
https://www.thingiverse.com/thing:2437440

y-carriage:
https://www.thingiverse.com/thing:3501612

these idlers:
https://www.thingiverse.com/thing:2186358

and this hoted-mount for my nimble & orion piezo
https://www.thingiverse.com/thing:2617424

[droftarts]

@tobias_munich Thanks for the links, that will be really useful! Especially the ones done in Fusion 360 which I can edit to my needs.

Ian