Large Delta printer not homing on an original duet Maestro

[NEVER LUCKY]

this is embarrassing what is the g code for inserting sd card again?

[Danal]

Power off whenever inserting or removing SD.

[Phaedrux]

You can also use M21 and M22 to load and eject the SD card.

https://duet3d.dozuki.com/Wiki/Gcode#Section_M21_Initialize_SD_card

[Danal]

Well, I learn something every day! Thanks @Phaedrux

[NEVER LUCKY]

noted. does this look about right ?

[NEVER LUCKY]

ill wire things up and test if i can connect the web interface

[Phaedrux]

That's a really good sign.

[NEVER LUCKY]

so i wired everything up and checked the endstops. it looks kinda good i guess.
After i pressed HOME ALL, the axes did what they were supposed to.

I want to thank all three of you guys for staying up this late and helping me figure this out and also for not giving up when i had no idea what could be done otherwise.

cheers lads and thanks so much.

@Danal @dc42 @Phaedrux

[NEVER LUCKY]

[Danal]

Wooo Hooo!