• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Odd prints with super jagged edges

Scheduled Pinned Locked Moved
Tuning and tweaking
2
4
757
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    oogway
    last edited by 29 Apr 2017, 07:14

    Hey all,

    These are my first prints and they are coming out super jagged. I've tried messing with different extruder speeds but it doesn't change much. My Delta moves super quick when printing. Not sure if that is the cause… anyways. The prints are below. What does it look like to you?

    Here is my config file if that helps.

    Configuration file for T3P3 Kossel XL with Duet WiFi: https://postimg.org/gallery/2gl47q47k/

    And the pictures of my prints. https://postimg.org/gallery/3c054p24m/

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 29 Apr 2017, 07:34

      Have you calibrated the extruder steps per mm?

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        oogway
        last edited by 29 Apr 2017, 08:23

        I have not, i must have missed that step during the initial setup. I'll calibrate it and report back the results.

        1 Reply Last reply Reply Quote 0
        • undefined
          oogway
          last edited by 1 May 2017, 00:42

          Calibrating the extruder was the missing step, thanks for save dc42!

          1 Reply Last reply Reply Quote 0
          1 out of 4
          • First post
            1/4
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA