Paneldue with Duet 3 6HC. information request

[TouristMK4]

I am looking for information on connecting PanelDue5i to a Duet 3 6HC. Currently have it on stand-alone configuration. The diagram for the mainboard connections doesn't list the required pinout for the display.
Any suggestions?

Thanks,

[A Former User]

You just need to map

+5v -> 5V_EXT
GND -> GND
URXD0 -> IO0_0.out
UTXD0 -> IO0_0.in

Just like shown on the wiki https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3#Section_Running_in_standalone_mode