Head Movement button values

[pma]

Hello,

For some reason when I open the web control panel on my duetwifi the Z movement button values have all changed to half the values of the corresponding X and Y buttons. What could have caused this?

X= 100
Y =100
Z = 50

[deckingman]

Don't know if this is the reason but if you go to Settings, then under the User Interface tab in the bottom left pane "Machine Control" there is a check box entitled " Half Z Movements". Is it ticked? If so try unticking it. Can't test it myself because I'm in the middle of a long print.
Ian

[pma]

That worked. Thank you.