Hello,

Just got round to try using sd card with my panel due and getting the same error.

duetwifi firmware 1.17e
paneldue firmware 1.15c on 7" screen
8gb sdhc card fat 32
150mm idc cable

That worked. Thank you.

deckingman,

I totally agree with what your saying. But I am just trying to get my printer tuned in with one filament to start with and can then adapt from there.

uvarovkv,

I can see your analogy but the path is surely controlled by the slicer which is not taking into account that this is a hole and the path needs to change.

Hello,

For some reason when I open the web control panel on my duetwifi the Z movement button values have all changed to half the values of the corresponding X and Y buttons. What could have caused this?

X= 100
Y =100
Z = 50

Hello,

I have a kossel xl with duetwifi board. If I print a square that has a square hole in it the outside dimensions are perfect but the internal square is undersize by .4mm. If I then print a round disc with a hole in it the outside and inside dimensions are undersize by .4mm. Can the M579 command be used to fix this issue?