RepRapFirmware 3.01-RC6 released

[tobias_munich]

@chrishamm seems that's my problem. will fix it..

[Dougal1957]

@chrishamm Chris I have upgraded mine to 1.3 of DSF but when attempting to upgrade to RC6 I get a failure due to no IAP file

Any advise

	M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.01-RC5 running on Duet 3 MB6HC v0.6 or 1.0
Board ID: 08DGM-9T66A-G63SJ-6J1DA-3SD6R-TV0BA
Used output buffers: 1 of 40 (5 max)
=== RTOS ===
Static ram: 154084
Dynamic ram: 160892 of which 52 recycled
Exception stack ram used: 216
Never used ram: 77972
Tasks: NETWORK(ready,2076) HEAT(blocked,1196) CanReceiv(suspended,3820) CanSender(suspended,1488) CanClock(blocked,1436) TMC(blocked,216) MAIN(running,4956) IDLE(ready,80)
Owned mutexes:
=== Platform ===
Last reset 124:09:52 ago, cause: software
Last software reset at 2020-03-03 18:27, reason: User, spinning module LinuxInterface, available RAM 79528 bytes (slot 3)
Software reset code 0x0010 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 38.4, current 41.6, max 43.2
Supply voltage: min 23.6, current 23.7, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.2, current 12.2, max 12.3, under voltage events: 0
Driver 0: standstill, reads 1090, writes 14 timeouts 0, SG min/max 0/0
Driver 1: standstill, reads 1090, writes 14 timeouts 0, SG min/max 0/0
Driver 2: standstill, reads 1091, writes 14 timeouts 0, SG min/max 0/0
Driver 3: standstill, reads 1091, writes 14 timeouts 0, SG min/max 0/0
Driver 4: standstill, reads 1092, writes 14 timeouts 0, SG min/max 0/0
Driver 5: standstill, reads 1092, writes 14 timeouts 0, SG min/max 0/0
Date/time: 2020-04-03 13:26:07
Slowest loop: 2.33ms; fastest: 0.14ms
=== Move ===
Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is ready with "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon* is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 0.80ms; fastest: 0.01ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- Ethernet -
State: disabled
Error counts: 0 0 0 0 0
Socket states: 0 0 0 0 0 0 0 0
=== CAN ===
Messages sent 1787965, longest wait 0ms for type 0
=== Linux interface ===
State: 0, failed transfers: 2
Last transfer: 16ms ago
RX/TX seq numbers: 36774/40855
SPI underruns 3, overruns 3
Number of disconnects: 1
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v1.3.0.0
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 32.88
 

Doug

[dc42]

@bearer said in ReprapFirmware 3.01-RC6 released:

Will future DWC releases like 2.1.0 retain full support for RRF2? At least until RRF3 goes mainstream perhaps? Couldn't see anything about compatibility except for 2.0.3 stated supporting 0.6/0.8.5 boards

That's unlikely. Future versions of DWC will provide features (e.g. the object cancellation interface) that are not supported by RRF2.

I expect RRF 3 to go "mainstream" shortly after RRF 3.01 stable is released. That release may be as little as a week away.

[dc42]

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

I have upgraded mine to 1.3 of DSF but when attempting to upgrade to RC6 I get a failure due to no IAP file

That file should be included in the DSF release. I can provide it if necessary.

[Dougal1957]

@dc42 please but it definitly fails and I have tried to do the Sudo Apt-get Update sequence twice as well I have appended the M122 log to my post above.

I will probably need simple instruction on what to do with the file mind.

Doug

[chrishamm]

@Dougal1957 Sorry, looks like like this file was missing in the RRF package, I've just added it back and uploaded it to another location: http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin You may need to rename it to Duet3iap_spi.bin.

[A Former User]

if the issue is stable/unstable package feed run grep duet3d -r /etc/aptto check and echo "deb https://pkg.duet3d.com/ unstable armv7" | sudo tee /etc/apt/sources.list.d/duet3d-unstable.listto fix if needed.

or what that guy said

[chas2706]

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

RepRapFirmware for Duet 3 MB6HC version 3.01-RC5 running on Duet 3 MB6HC v0.6 or 1.0

You M112 suggests you are running 3.01-RC5.

[A Former User]

@chrishamm said in RepRapFirmware 3.01-RC6 released:

To check, have a look at /etc/apt/sources.list.d/duet3d.list and make sure you have unstable instead of stable in there.

btw that conflicts with the wiki that says to create another file duet3d-unstable.list

[Dougal1957]

@chas2706 exactly the point the upgrade to rc6 is failing

[Dougal1957]

@bearer Defo on the Unstable branch

pi@duet3:~ $ grep duet3d -r /etc/apt
/etc/apt/sources.list.d/duet3d.list:deb https://pkg.duet3d.com/ stable armv7
/etc/apt/sources.list.d/duet3d-unstable.list:deb https://pkg.duet3d.com/ unstable armv7
Binary file /etc/apt/trusted.gpg.d/duet3d.gpg matches
pi@duet3:~ $ echo "deb https://pkg.duet3d.com/ unstable armv7" | sudo tee /etc/apt/sources.list.d/duet3d-unstable.list
deb https://pkg.duet3d.com/ unstable armv7
pi@duet3:~ $ sudo apt-get update
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease        
Hit:3 https://pkg.duet3d.com unstable InRelease                        
Hit:4 https://pkg.duet3d.com stable InRelease    
Reading package lists... Done
pi@duet3:~ $ 
 

Doug

[A Former User]

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

Defo on the Unstable branch

yeah

do wget http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin -O /opt/dsf/sd/sys/Duet3iap_spi.bin

[chrishamm]

@Dougal1957 The stable list is still in there: sudo rm /etc/apt/sources.list.d/duet3d.list followed by sudo apt-get update should work for you

[A Former User]

@chrishamm said in RepRapFirmware 3.01-RC6 released:

The stable list is still in there

is that a problem, more importantly, should it be a problem?

[Dougal1957]

@bearer that sorted it Thanks very much as you probably imagine I am not good with LINUX at all although I am learning some of it

[A Former User]

@Dougal1957 i only translated

chrishamm said in RepRapFirmware 3.01-RC6 released:

@Dougal1957 Sorry, looks like like this file was missing in the RRF package, I've just added it back and uploaded it to another location: http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin You may need to rename it to Duet3iap_spi.bin.

into copy/paste; and we all had to learn at some point

[Dougal1957]

@bearer Prob is that I am getting a bit old you know the saying about teaching old Dogs new tricks lol

[A Former User]

@Dougal1957 you're trying, and succeeding; no-one gonna fault you for that.

[chas2706]

Just upgraded and having issues.
On the SBC display DWC reports that the sys drive is unmounted:

But in web browser DWC looks ok but nothing works when clicked:

Any ideas?

[A Former User]

@chas2706 said in RepRapFirmware 3.01-RC6 released:

On the SBC display DWC reports that the sys drive is unmounted:

see what ls -l /opt/dsf/sd says in a ssh shell?